DOOSUNG CO., Ltd.

메뉴열기
DOOSUNG Co.,Ltd. 메뉴닫기

PRODUCTS

Total EMC / Thermal Products

Conductive Silicone

Product structure and application

Characteristic
The conductive rubber elastomer (ID□G) product line is a product manufactured to maintain elasticity and allow electricity to flow by filling silicon rubber with electrically conductive metal powder. Because it uses silicone rubber, it has excellent waterproof, tensile strength, weather resistance, heat resistance and elasticity, and has excellent electromagnetic wave shielding rate. It is manufactured by molding, extrusion, casting molding, etc. using a rubber mold according to various shapes depending on the application.
apply
Wired/wireless communication equipment, IT equipment, medical equipment, industrial electronic equipment

Product specifications

Product specifications
Electrically Conductive Silicone
Conductive Filler SC SA NC
Binder Silicone Silicone Silicone
Electrical
Properties
Volume Resistivity (Ω·cm) 0.02 0.08 0.10
Shielding Effectiveness (dB) > 60 > 60 > 40
Physical
Properties
Specific Gravity 3.7 (±0.3) 1.8 (±0.3) 2.0 (±0.3)
Hardness (Shore A) 65 (±5) 65 (±5) 60 (±5)
Tensile Strength (kgf/㎠) 30 (430psi) 20 (285psi) 20 (285psi)
Tear Strength (kN/m) 6 5 6
Elongation (%) 200 200 200
Service Temp. (℃) - 50 ~ 120 - 50 ~ 120 - 50 ~ 120
Thermal
Conductivity
Vertical (W/m·K) -1.1 2.3 0.8
Horizontal (W/m·K) 1.3 1.9 1.6
  • * The values in this table are properties of only conductive silicone.
  • * Material

    SC : Silver coated Copper

    SA : Silver coated Aluminum

    NC : Nickel coated Graphite

Quality Performance (SE)

Mold Type

Sheet Gasket
P/N :
IDSG 1
-
AAA 2
-
BBB 3
-
CCC 4
-
DDD 5
-
EEE 6
-
FFF 7
  • 1 Serial Number

  • 2 Thickness : mm

  • 3 Material : SC, SA, NC

  • 4 Outer Size (mm) or Width (mm) - sheet type

  • 5 Inner Size (mm) or Length (mm) - sheet type

  • 6 Tape (sheet type ) : D (Silicone Mesh tape)

  • 7 S : Refer to Drawing

O-Ring Gasket Ⅰ
P/N :
IDOG 1
-
AAA 2
-
BBB 3
-
CCC 4
-
DDD 5
-
EEE 6
  • 1 Serial Number

  • 2 Thickness (mm) or Diameter (Ø)

  • 3 Material : SC, SA, NC

  • 4 Outer Size (mm)

  • 5 Inner Size (mm)

  • 6 S : Refer to Drawing

O-Ring Gasket Ⅱ
P/N :
IDDG 1
-
AAA 2
-
BBB 3
-
CCC 4
-
DDD 5
-
EEE 6
  • 1 Serial Number

  • 2 Thickness (mm) or Diameter (Ø)

  • 3 Material : SC, SA, NC

  • 4 Outer Size (mm)

  • 5 Inner Size (mm)

  • 6 S : Refer to Drawing

Washer Gasket
P/N :
IDWG 1
-
AAA 2
-
BBB 3
-
CCC 4
-
DDD 5
-
EEE 6
-
FFF 7
  • 1 Serial Number

  • 2 Thickness (mm)

  • 3 Material : SC, SA, NC

  • 4 Outer Size (mm) or Width (mm) - sheet type

  • 5 Inner Size (mm) or Length (mm) - sheet type

  • 6 Tape (sheet type ) : D (Silicone Mesh tape : ID-20N41)

  • 7 S : Refer to Drawing

Extrusion Type

O-Strips
P/N :
IDCSO 1
-
AAA 2
-
BBB 3
  • 1 Serial Number

  • 2 Size (mm)

  • 3 Material : SC, NC

Unit : mm

제품 사양
P/N NominalDiameter Recommended Groove Dimensions (±0.05)
W D
IDCSO-071 0.71 0.80 0.59
IDCSO-081 0.81 0.91 0.66
IDCSO-102 1.02 1.14 0.81
IDCSO-122 1.22 1.35 0.97
IDCSO-135 1.35 1.50 1.07
IDCSO-157 1.57 1.68 1.27
IDCSO-178 1.78 1.93 1.42
IDCSO-188 1.88 1.98 1.50
IDCSO-203 2.03 2.18 1.65
IDCSO-216 2.16 2.31 1.75
IDCSO-229 2.29 2.45 1.85
IDCSO-236 2.36 2.52 1.89
IDCSO-254 2.54 2.71 2.02
IDCSO-262 2.62 2.79 2.08
IDCSO-284 2.84 3.02 2.26
IDCSO-302 3.02 3.20 2.41
IDCSO-318 3.18 3.38 2.54
IDCSO-330 3.30 3.48 2.64
IDCSO-340 3.40 3.59 2.72
IDCSO-353 3.53 3.73 2.82
IDCSO-373 3.73 3.96 2.96
IDCSO-401 4.01 4.27 3.17
IDCSO-432 4.32 4.61 3.42
IDCSO-478 4.78 5.08 3.81
IDCSO-495 4.95 5.29 3.92
D-Strips
P/N :
IDCSO 1
-
AAA 2
-
BBB 3
  • 1 Serial Number

  • 2 Size (mm)

  • 3 Material : SC, NC

Unit : mm

제품 사양
P/N Nominal Dimension Recommended Groove

Dimensions (± 0.05)
W H R W D
IDCSD-140 1.62 1.40 0.81 1.92 1.20
IDCSD-163 1.40 1.63 0.70 1.70 1.33
IDCSD-173 1.57 1.73 0.79 1.87 1.43
IDCSD-178 2.03 1.78 1.02 2.43 1.48
IDCSD-198 2.39 1.98 1.19 2.79 1.68
IDCSD-216 1.57 2.16 0.78 1.87 1.86
IDCSD-226 1.98 2.26 0.99 2.48 1.91
IDCSD-239 2.39 2.39 1.19 2.79 1.96
IDCSD-241 1.78 2.41 0.89 2.08 2.01
IDCSD-279 3.81 2.79 1.91 4.21 2.29
IDCSD-292 2.60 2.92 1.30 3.00 2.42
IDCSD-345 3.15 3.45 1.55 3.65 2.95
IDCSD-396 3.96 3.96 1.98 4.36 3.46